Search results

Search Result
Guide
Guide

Create a case with DEXIS

Send your scan from DEXIS IOS and create your first case.
Start
Guide
Guide

Create a case with Alliedstar

Send your scan from Alliedstar IOS and create your first case.
Start
Guide
Guide

Create a case with Shining 3D

Send your scan from Shining 3D IOS and create your first case.
Start
Guide
Guide

Design step by step

Learn how to design your prosthesis step by step
Start
Guide
Guide

Create a case manually

Scan, Plan, Design and Export : your first case step by step
Start
Guide
Guide

Create your account and customize your environment

Create your Circle One account and set up your workspace.
Start
Video
Connect your scanner
Send your scans from Alliedstar
Send scans from AS Connect to Circle One — scans imported, patient reference synced.
Learn more
Video
Connect your scanner
Send your scans from DEXIS
Send your scans directly from DEXIS Scanflow — no file export, no manual upload.
Learn more
Article
Technical Support
Remote Access Software
Download and install RustDesk or TeamViewer so the Circle One support team can assist you remotely.
Learn more
Article
Technical Support
System Requirements
Minimum hardware, network, and software requirements to run Circle One effectively.
Learn more
Video
Get started
Create your account
Create your Circle One account in a few clicks, confirm my email, and log in to start designing.
Learn more
Video
Refine a design
Modeling
Adjust the shape, position, and details of your prosthesis with just a few simple actions.
Learn more
Video
Refine a design
Teeth Identification
This step allows you to check the automatic teeth identification performed by Circle One.
Learn more
Video
Create a case
Step - Design
Circle One generates a prosthetic proposal in under a minute. Navigate the 4 design sub-steps.
Learn more
How do I remove a scan defect that disrupts my modeling?

If your scans contain defects that affect the modeling, you can ignore the affected scans entirely from the outer surface settings menu.

Please be aware that this choice may affect the fit and/or occlusion.

‍

For an artifact located on the margin line, there is not yet a mesh editing tool. Our teams are working on this feature, which will be available later.

Modeling
FAQ
Why can't I move my margin line?

The margin line can only be moved within an area close to the one defined by the teeth identification.

If you cannot move a point to the desired location, check the identification of the preparation in the Teeth Identification step and adjust it if needed.

Margin line: moving points
Margin Line
FAQ
Why is my articulator unavailable?

The input scans contain interpenetrations that the software cannot handle.

Tip: provide a bite scan. Circle One then offers an alternative occlusion that lets you correct the scan interpenetrations caused by intraoral scanner errors.

Modeling
FAQ
Can I move several teeth at the same time?

Not yet. It is not possible to select several prostheses to move them at the same time: each prosthesis is moved individually. Our teams are working on this feature, which will be available later.

Modeling
FAQ
Can I apply changes to several products at once?

Not yet. It is not possible to select several products to apply the same change to them at the same time. Our teams are working on this feature, which will be available later.

Modeling
FAQ
Where can I find all the warnings for my case?

The software warnings are displayed directly on the product selection buttons, on the left of the screen.

Errors must be resolved as you go. Warnings should be taken into consideration and assessed with your clinical expertise.

All warnings are repeated in the confirmation window, before the files are generated.

Modeling
FAQ
Are brushes necessary to get a good design?

No, using the brushes is not always necessary with Circle One Design. We recommend using the Smart Tools (manipulators, sliders) instead, designed for simpler and more efficient modeling.

Modeling
FAQ
What is the difference between Global, Regional and Local?

The Smart Tools are organized by the area they affect, from the broadest to the finest:

  • Global: the whole tooth (Morphology, Anatomical detail and Occlusal contact sliders, manipulators),
  • Regional: an area of the tooth, for example the emergence profile or a cusp (manipulators and Deform tool),
  • Local: a precise point of the tooth (finishing brushes).

We recommend using them in this order, from the overall view to the fine detail, for more efficient modeling.

Smart Tools: Global, Regional, Local
Modeling
FAQ
How do I change the height of my prosthesis?

To change the height of your prosthesis, move a position manipulator with the right mouse button: the opposite manipulator moves at the same time.

This feature can also be used to widen the prosthesis overall or to close the embrasures simultaneously.

Position manipulators for height
Modeling
FAQ
Can I work in under-occlusion?

Yes. To work in under-occlusion, increase the occlusal contact distance in the outer surface settings. You can also set it in your user profile, or change it in the outer surface settings for a one-off need.

A positive distance eases the contacts or creates an under-occlusion; a negative distance tightens them. You can likewise tighten or relax the proximal contacts.

When working in under-occlusion, the contact coloring extends to match your needs.

To learn more: https://help.circle.one/articles/design-settings-inner-outer-surface

Outer surface settings: contact distances
Modeling
FAQ
Why is the “Occlusal Alignment” step gone? Where can I find the alternative occlusion?

The “Occlusal Alignment” step was removed in Circle One Design 1.3 to speed up the modeling workflow. No functionality is lost: the choice of the alternative occlusion is now available directly in the Articulator menu, in the Modeling step.

‍

Occlusion
FAQ
Can I create a case with several products?

Yes. Since version 1.3, Circle One Design lets you model several prostheses in the same case, wherever they are located. One Circle Credit is counted for each prosthetic tooth.

To switch from one product to another, select the prosthesis directly in the 3D view or from the menu on the left.

The processing time of the proposal depends on the number of prostheses: please be patient if your case includes many prostheses.

Multi-product case: switching product
Modeling
FAQ
Can I design several neighboring or antagonist prosthetic teeth?

Yes. You can model a case with several prostheses, wherever they are located.

Please note: the processing time of the proposal depends on the number of prostheses in the case (the more prostheses, the longer the loading).

A few limitations:

  • dynamic abrasion between antagonist prostheses is not yet available,
  • local thickness reduction in case of material conflicts is not available when the conflict occurs between two prostheses.
Modeling
FAQ
Does Circle One Design have a virtual articulator? Can I manage dynamic occlusion?

Yes. Circle One Design includes a virtual articulator, available in the Modeling step.

To activate it, click the Articulator icon in the sidebar and select the Dynamic occlusion. Your prostheses are then adapted to take the dynamics into account. You can:

  • adjust the range of motion by moving the end manipulators (diamonds),
  • explore positions with the position manipulator (circle),
  • change the incisal table angle,
  • adjust the vertical dimension,
  • use the modeling tools in a position other than static occlusion.

    ‍
Modeling
FAQ
Can I copy a tooth from a pre-scan (pre-operative scan), a proximal tooth or an opposing tooth?

Yes. When a pre-operative scan is available, you can choose what the automatic proposal is based on:

  • a copy of the shape and position of the tooth from the pre-operative scan,
  • a prediction of the shape and position based on the proximal teeth and a reference library.

This choice is not final: you can always change the shape and position of the tooth afterwards.

Automatic proposal: copy from the pre-op scan
Modeling
FAQ
Why does a tooth label turn red in the Teeth Identification step?

A red label indicates that the prepared tooth is not correctly identified.

You need to move the appropriate handle to correct its identification.

‍

Modeling
FAQ
How do I read the contact colormap?

The colormap is inspired by articulating paper: the darker the color, the stronger the contact.

  • Light blue: light contact
  • Electric blue: standard contact
  • Dark blue: strong contact
  • Red: interpenetration

It shows the contacts for the current occlusion position. If you move the arch in the articulator, the colormap reflects the contacts in the new position; contacts at static occlusion are shown in dark green.

You can show or hide the contacts (and the minimum thickness areas) from the Colormap menu.

‍

Modeling
FAQ
Why is my margin line red? Why can't I go to Modeling from the Margin Line & Insertion Axis step?

You cannot leave the Margin Line & Insertion Axis step to go to Modeling if the margin line does not allow a prosthesis to be created. The margin line then turns red in any of these cases:

  • the margin line intersects itself,
  • the margin line intersects a neighboring margin line (multi-product case),
  • the area enclosed by the margin line is too small.

To fix it, adjust the margin line: add a point with a left-click, remove one with a right-click, or drag the points to refine the outline.

‍

‍

Modeling
FAQ
Why am I getting a “reinforcement conflict” alert?

The reinforcement conflict warning appears when the software cannot apply the reinforcement size set in the outer surface settings without the reinforcement colliding with the neighboring teeth or the antagonist.

The detailed warning is shown in the Settings menu, where you can adjust the reinforcement size if needed.

‍

Outer surface settings: reinforcement size
Modeling
FAQ
Why am I getting an alert about a conflict between minimum thickness and contacts?

This alert appears when Circle One Design cannot meet both of the following at the same time:

  • the minimum thickness of the crown, set in the inner surface settings,
  • the contact distances, set in the outer surface settings.

In case of a conflict, the material thickness is always preserved: you will need to touch up the prosthesis to adapt the insertion and the occlusion.

The alert details are shown in the inner surface settings (gear icon).

‍

‍

‍

Outer surface settings: contact distances
Modeling
FAQ
Is my design saved?

Not yet. Your design is not saved at this time.

Design
FAQ
My case is stuck while loading the Design stage.

If your case is stuck while loading the Design stage (for example, the loader is stuck at 40%), please check your network connection. If the problem persists, please restart your case from the beginning.

Design
FAQ
Can I undo actions during the Design step?

Yes. You can use the undo/redo buttons available in the interface at any time.

Modeling
FAQ
Can I add a border reinforcement?

Yes. In the Manufacturing Settings, you can set the thickness of the border reinforcement to make it compatible with your milling tool.

‍

Modeling
FAQ
Can I adjust the contact points while modeling?

Yes. In the Design step, you can adjust antagonist contacts in real time by smoothing or deforming them using the “Antagonist Contacts” slider.
The contacts are displayed in color through the Colormap panel, helping you fine-tune the occlusion of your prosthesis.

‍

Modeling
FAQ
Is the minimum thickness checked? Can I adjust it?

Yes. The minimum thickness for the selected material is maintained throughout design. Circle One alerts you if the prosthesis is not insertable at the chosen minimum thickness, and offers three options: auto-adjust, manual correction, or continue without correction.

You can adjust the minimum thickness in the Manufacturing Settings or in “My Design Preferences.” Thin areas are visualized in the Colormap panel.

Modeling
FAQ
Is there automatic margin line detection?

Yes. Circle One automatically detects the cervical margin line.
You can then refine it manually in just a few clicks to match your clinical preferences.
This takes place during the Margin Line & Insertion Axis review step.

‍

Margin Line
FAQ
What is the recalculated occlusion?

Circle One offers two occlusion options: the one from your intraoral scanner and a recalculated occlusion generated automatically from the bite registration and arch collision analysis. You can compare both and choose the one that best fits your situation.

Occlusion
FAQ
Will my export always remain accessible?

Yes. Once your manufacturing files are generated, they remain available in your case details.
You can download them as many times as you need, at no additional cost.

‍

Export
FAQ
How do I get my manufacturing files? What do they include?

Once generated, your production files are available for download.
They include:
- the modeled prosthesis in STL format
- the finish line in PTS format (useful for certain manufacturing methods, primarily milling)

All export files are automatically oriented according to your chosen production method (milling or 3D printing).

You can download them as a ZIP file or in OCM (Circle One Manufacturing) format.
The OCM format lets you automatically launch your manufacturing software upon download when the Circle One Manufacturing module is installed.

‍

Export
FAQ
Is the bur diameter (tool offset) taken into account during real-time modeling?

Yes. The bur diameter (tool compensation) is defined when configuring your machine in “My Equipment.” Circle One uses this during modeling to ensure your design is perfectly millable.

This option also applies to printing settings (0 mm by default, 0.3 mm recommended) to avoid resin residue in sharp intaglio areas.

Export
FAQ
Why does my session end if I stay inactive during the Design step?

If no activity is detected for a few minutes, the case automatically closes. This helps manage server load and keep Circle Credit costs optimized.

Design
FAQ
Can I go back during the Design step?

Yes. You can use the undo/redo buttons available in the interface at any time.

Design
FAQ
Can I reopen and edit an existing design?

Not yet. Your design cannot be saved at No, a validated design can't be reopened or edited. To start over from an existing case, use the dot menu on the case card and select "Create a new case from patient files": a new case is created with the same scans, letting you restart the design from scratch.

Design
FAQ
Can I modify the proposal? Is it safe to do so? How?

Yes. You can freely adjust the automatic proposal using the available tools.
Thanks to our Collaborative AI, Circle One updates the model in real time and maintains key parameters such as: distance to adjacent and opposing teeth, insertion axis, minimum thickness, functional balance.

Every adjustment is simulated instantly, helping you keep a stable and reliable design as you refine it.

‍

Design
FAQ
How is the automatic proposal calculated?

The automatic proposal is generated by analyzing your scans and taking several key parameters into account, including tooth anatomy, occlusion, proximal contacts, minimum thickness requirements, and manufacturing constraints.

Our Collaborative AI maintains occlusal contacts, insertion axis, and functional balance in real time, helping you obtain a design that is both functional and easy to manufacture.

‍

Design
FAQ
How do I access my cases? How can I view case details?

From your dashboard, click “My Cases” to view the full list of your cases.
You can sort or search for a specific case using the filters or the search bar.

After you approve your design, the case summary opens automatically. If you want to review it, simply click the “View” button on the case card.

‍

Plan
FAQ
How many prosthetics can I design at once, and which types are available?

You can design crowns, inlays, onlays, overlays, and veneers. More prosthetic types will be added soon.

Starting with Circle One Design 1.3, you can create a case that contains multiple prostheses.

Plan
FAQ
What is the recommended resolution for digital impressions?

Circle One works fine with a standard-definition scan.

A scan with too much detail (HD) can, in some cases, slow down the loading of the case.

Standard quality offers the best balance between model accuracy and processing performance.

‍

Scan
FAQ
Can I add a prescan?

Yes. The prescan is available in the Design step and keeps a reference of the tooth’s original anatomy. Our AI can generate an interpolation between the automatic proposal and the prescan shape, so you can choose the result that suits you best.

Scan
FAQ
Do I need to provide a bite scan?

Bite scans are optional but highly recommended: they enable accurate occlusion analysis and improve the calculation of element orientation.

For optimal efficiency, here are our recommendations:

- For a full arch, you can create one bite scan per hemi-arch,
- For a hemi-arch, center the bite scan on the preparation and scan the adjacent teeth,
- Capture the bite scan after preparation,
- Do not scan soft tissues: if they appear on the bite scan but not on the main scan, this will create areas without overlap.

If your scanner does not export a bite scan, you can usually enable this option in the export settings.

‍

Scan
FAQ
Which file formats are supported?

Circle One supports STL and PLY
DCM files (3Shape DCM) are not supported at this time.

‍

Scan
FAQ
When do I pay?

For each case, the Circle Credit cost is shown in the top-right corner of the case. Credits are consumed when the design is validated.

Note: restarting a validated design will consume an additional Circle Credit.
Pricing
FAQ
How much does it cost? What are Circle credits and how do they work?

Circle Credits are our flexible credit system that allows you to design dental prostheses according to your actual needs.
One designated and exported prosthetic tooth costs 1 Circle Credit.

To purchase Circle Credits, go to the “My Circle Credits” page and click “Buy a Circle Credits Pack.” All your unused Circle Credits remain available indefinitely: simply recharge your Circle Credits when you need them.

‍

Pricing
FAQ
What is One Click Manufacturing?

One Click Manufacturing automatically launches your manufacturing software as soon as your production files are downloaded. It is provided as a small application to install on your computer.

Learn more: About One Click Manufacturing

Equipment
FAQ
Can I use multiple machines or different materials?

Yes. Circle One automatically generates the files required for your chosen production type (milling or 3D printing). You can work with any milling machine and/or 3D printer, as well as the materials of your choice.

Equipment
FAQ
Which manufacturing machines are compatible with Circle One?

Circle One is compatible with most 3D printers and milling machines, generating files for the main equipment on the market.

You can also automatically open your production files in your manufacturing software using our OneClick Manufacturing module. Learn more: oneclickmanufacturing.circle.dental

Equipment
FAQ
Which intraoral scanners are compatible with Circle One?

Circle One works with all intraoral scanners on the market and supports standard file formats, allowing seamless integration with your existing equipment.

Some devices offer advanced integration for increased efficiency and an even smoother user experience. Check out our “Partners” section

‍

Equipment
FAQ
Do I need a powerful computer or specific equipment?

No. Circle One runs directly in your web browser, no installation required, and all calculations are performed on our servers.

For the best experience, we recommend using Google Chrome.

A standard computer (PC or Mac) with a stable internet connection is enough. Some features may not be available on tablets or mobile devices.

For the exact minimum system requirements, refer to the user manual

Equipment
FAQ
Can I save my design preferences?

Yes. You can save your design preferences (minimum thickness, manufacturing settings, etc.) in “Design parameters,” accessible from your profile.

These settings will be automatically applied to all future cases, letting you standardize your workflow to match your preferences.

My account
FAQ
Are my data saved? For how long?

Yes. Your data are securely stored for 1 year, allowing identical re-fabrication if needed.

All files are encrypted and hosted on ISO 27001-certified servers.

My account
FAQ
How do I invite a dentist or assistant to my Circle One practice?

From your Circle One account, go to the practice settings, then to the User Management section.

You can invite a dentist or assistant using the same procedure, regardless of their role.

If the person already has a Circle One account: they will receive an invitation to join your practice.

If the person does not yet have an account: an invitation will be sent to create an account, then automatically join your space.

My account
FAQ
How do I create an account for my assistant?

A practice can have multiple accounts: dentist and assistant accounts.

To create and link an assistant (or dentist) account to your practice, go to the “My Practice” page in the “User managment” section and click on “Invite a user.”

Assistant accounts have access to all cases created by any dentist within the same practice.

My account
FAQ
How do I log in?

After signing up, you received an email inviting you to set your password.

Log in to your Circle One account here https://one.circle.dental/ using the email address and password you created.

If you forgot your password, simply click “Forgot password” to reset it.

My account
FAQ
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Nothing found...